images bangalore torpedo nomenclature

Loading of ammo can be done either by hand stemming or by direct pressing. A pear-shaped aluminum nose, attached to the forward end of the snake in such a way that the nose can sw ivel slightly, aids in guiding the snake over and around obstructions. Marshall,'Dictionary of Explosives', Churchill, London Retrieved 26 July Unsourced material may be challenged and removed. The snake is 14" wide, 5" high and ft 1 ong when assembled. Another method of loading consists of pouring the 'porridge' into components in one or more increments.

  • Bangalore Torpedo
  • Bangalore torpedo
  • Bangalore Torpedoes Detonating Cables Demolition Hoses and Demolition Snakes These Explosives

  • A Bangalore torpedo is an explosive charge placed within one or several connected tubes. It is used by combat engineers to clear obstacles that would. DESCRIPTION: The M1A1 Bangalore Torpedo is an antipersonnel mine clearing charge dating back to World War II. It clears a footpath DISTRIBUTION RESTRICTION: Distribution authorized to U.S. Government agencies only to protect technical or operational information from.
    The chges are loaded in ft of the ft snake, giving an expl wt of 14 lbs per loaded foot.

    It is sometimes colloquially referred to as a "Bangalore mine", "banger" or simply "Bangalore". In other projects Wikimedia Commons.

    Bangalore Torpedo

    The slabs are broken into pieces suitable in size for biscuit pellet loading of ammo. In a test detonation conducted on the television show Future Weaponsthe Bangalore Blade blasted a gap roughly five meters wide in concertina wireand created a trench deep enough to detonate most nearby anti-personnel mines.

    The usual length of this snake was ft.

    images bangalore torpedo nomenclature
    Bangalore torpedo nomenclature
    During the Battle of CambraiBritish Royal Engineers used them as diversions to distract the enemy from where the real battle was to be fought.

    Bangalore torpedo

    Barbe no first name or initial given proposed-in to diminish the sensitivity of NC by incorporating organic or inorganic nitrates, preferrably AN.

    One end of the cable was attached to the ground and provided with US Army Special Nonelectric Blasting Cap described in Ref 14a 15" length of time fuse and a lighter. The moisture free material is transferred to a Gooch crucible in which it is extracted with hot, dry benz until free of TNT. This prevented premature explns while pushing or towing.

    For this, a 5-ft length of bangalore torpedo, equipped with a pull fuze, was.

    images bangalore torpedo nomenclature

    (Brit nomenclature), called 20/80 Baratol by the US nomenclature. Some older bangalore torpedoes use amatol (80 percent ammonium nitrate booster charge in some newer shaped charges and bangalore torpedoes.

    images bangalore torpedo nomenclature

    Demolition Kit, Bangalore Torpedo: M1A1 and M1A Demolition nomenclature on the item is stenciled in yellow: NOTE.
    Bangalore torpedoes were packed in wooden crates that contained 10 torpedo sections, 10 connecting sleeves, and 1 nose sleeve; the total weight of a crate was pounds 80 kg. Comment it up The primary use of the torpedo is clearing paths through wire obstacles and heavy undergrowth. Moisture content must not exceed 0. It is sometimes colloquially referred to as a "Bangalore mine", "banger" or simply "Bangalore".

    Video: Bangalore torpedo nomenclature Bangalore Torpedo - Live Fire Explosives Training

    Then the melt is cooled slightly while the agitation is continued and is loaded into ammo at the lowest temp at which it will flow freely Ref 4.

    images bangalore torpedo nomenclature
    OLSVIK CANVAS BARNEHAGEPLASS
    Then the melt is cooled slightly while the agitation is continued and is loaded into ammo at the lowest temp at which it will flow freely Ref 4.

    Bangalore Torpedoes Detonating Cables Demolition Hoses and Demolition Snakes These Explosives

    The pipes would be screwed together using connecting sleeves to make a longer pipe of the required length, somewhat like a chimney brush or drain clearing rod. Bangalore torpedoes were packed in wooden crates that contained 10 torpedo sections, 10 connecting sleeves, and 1 nose sleeve; the total weight of a crate was pounds 80 kg.

    Schoken Booksp Torpedo sections could be attached together via spring clip-equipped connecting sleeves, and a blunt nose sleeve was provided so that the assembled torpedoes could be pushed through obstacles or across terrain without getting stuck.

    Comments (1)