images pre tuned duramax ecm wiring

Source: Kennedy Diesel Call: Fax www. While the TCM adjustments will be more noticeable in a modified application bigger tires, bigger turbos, bigger injectors, etc. Ensure the new pin matches the height of the others alongside it, and that none of the other pins have been disturbed in the process. It's relatively easy. You're now finished under the hood. In addition to pin C used here to toggle between two different tunes, pin C can be used for a switch-selectable high-idle in an LB7 Duramax equipped truck. We'll show you how to insert the new pin and wire into the electrical connector, as well as how to remove and replace the ECM. The driver can then switch between the two on the fly. Leave it loose, as repositioning it slightly may help when unbolting the two electrical connectors. When toggled in the other position upthe switch removes the ground, which enables the secondary tune.

  • BT DieselWorks Duramax/Allison standalone wiring harness
  • LBZ DURAMAX DURAMILEAGE PRETUNED ECM
  • BT DieselWorks Precrimped Duramax ECM pin with wire

  • BT DieselWorks Duramax/Allison standalone wiring harness

    The lynch pin of making the Pre-Tuned ECM program work was a by EFILive and custom or Calibrated Power tunes are.

    Recommendations on where to get the best pre-tuned ECM? Looking for simplest way to get some extra ponies, and don't think I need all of the.

    images pre tuned duramax ecm wiring

    The GM Duramax/Allison uses an ECM (Engine Control Basically, the factory TCM is commanding the ECM to pull fuel before the shift to. tuning software (like most do), you will need to install two new wires.
    Remove the blue pin filler from the unoccupied pin-1 location found on the rear side of the black connector C2as shown at left.

    Ensure the new pin matches the height of the others alongside it, and that none of the other pins have been disturbed in the process. Locate and place a mark beside pin 31, as indicated. Kennedy Diesel is now offering custom ECM tuning, which provides for a host of additional programming features. KD has spent a considerable amount of time creating a variety of tunes that can be tailored to just about any application or owner expectation, which makes it easier for those owners who would rather drive their truck than spend the time necessary to dial-in a custom tune on their own.

    Be careful and deliberate.

    images pre tuned duramax ecm wiring

    This process began at the firewall and concluded at the ECM connector C1 - using an existing black plastic corrugated wiring loom.

    images pre tuned duramax ecm wiring
    Alexander packard new profit inc
    So no more buttons to push to command lock-up as you go down the track and no more remembering to unlock at the end of the track either.

    LBZ DURAMAX DURAMILEAGE PRETUNED ECM

    Depending on what version Duramax you have, simply snip off the other wire somewhere close to the switch. A switch gives the driver the option of switching between two different tunes stored in the ECM.

    Video: Pre tuned duramax ecm wiring SIX SPEED ALLISON TCM TUNE ADVANTAGES

    The new pin is pointed to in this photo. Now you'll need to remove the black plastic cover on the back of the "black" electrical connector. It's relatively easy. Unwrap the tape securing the end of the wiring loom.

    Duramax Tuner.

    Start Here: Choose by Model or Category.

    BT DieselWorks Precrimped Duramax ECM pin with wire

    LB7: 01 - 04 · LLY: - 05 · LBZ: 06 - 07 · LMM: - 10 · LML: · L Duramax. Kennedy Diesel is now offering custom ECM tuning, which provides for a host The included switch and wiring come pre-assembled with two ECM wires, one. One of the best features of the KD tunes is that the ECM can be programmed with The included switch and wiring come pre-assembled with two ECM wires.
    We'll show you how to insert the new pin and wire into the electrical connector, as well as how to remove and replace the ECM.

    The TCM cover is held in place by two 10mm hex-head bolts near the top of the cover.

    Video: Pre tuned duramax ecm wiring Duramax Diesel NO Crank NO Start problem FIX

    The ECM is now free to tip out and up. It's relatively easy. The DSP5 option will allow you to select from multiple performance tunes via an in-cab adjust-on-the-fly control knob. In this photo, I used a 7mm nut driver to loosen and remove the connectors.

    The ECM is held in place by both a plastic tab and a metal clip.

    images pre tuned duramax ecm wiring
    PUBLICATIE JAARSTUKKEN 2012
    Included instructions, along with an online tutorial video will aid in this step and make it much less intimidating. This allows a harder load to be placed on the engine for more boost on the line and prevent the truck from creeping through the brakes at the staging tree.

    KD is currently offering a variety of tunes that begin with a couple of different fuel economy versions that have produced up to a 2 mpg improvement, to power increases in 20 hp increments all the way up to the giant killer It's relatively easy. KD has spent a considerable amount of time creating a variety of tunes that can be tailored to just about any application or owner expectation, which makes it easier for those owners who would rather drive their truck than spend the time necessary to dial-in a custom tune on their own.

    Begin by unbolting the negative battery terminal from both batteries.

    Comments (5)

    1. Grozuru

      Reply

      If the original ECM is not to be re-installed, wrap it in bubble-wrap and store it in a safe place.

    2. Taugul

      Reply

      Once off the fan shroud, unplug the two TCM electrical connectors by squeezing the locking tabs on each side of each connector pointed to in photo. It's important not to damage the cover, as it helps to secure the harness.

    3. Akim

      Reply

      So no more buttons to push to command lock-up as you go down the track and no more remembering to unlock at the end of the track either. I had removed the electrical center cover to allow routing the wire through an existing loom.

    4. Shakasho

      Reply

      While the TCM adjustments will be more noticeable in a modified application bigger tires, bigger turbos, bigger injectors, etc.

    5. Vulabar

      Reply

      I attached the grounding eyelet attached to the switch under a nut behind the diagnostic connector.